English Home Up Español Home

high power bay

 

 

Portable Broadband FM Dipole

Dipolo Portatil de FM Banda Ancha

Model BKG1/P Medium Power

This broadband dipole antenna constructed of hot dipped galvanized steel is designed to last a long time in any weather condition. Because of its sturdy construction it can support up to 2 kw of input power with the appropriate connector. Since it has a wide angle of radiation it is suggested for omni-directional arrays. Due to the fact that is easily disassembled and reassembled, it can placed in a compact container making it very portable and inexpensive to ship.

Esta antena dipolo de banda ancha, fabricada de acero galvanizado en baño caliente fue concebida para ser duradera en cualquier condición de clima. Debido a su robusta construcción puede soportar hasta 2 kw de potencia de entrada con el conector apropiado. Esta antena es recomendada para formaciones omnidireccionales ya que tiene un gran ángulo de irradiación. Dado al hecho que es facil de armar y desarmar esta antena puede ser anviada en un contenitor muy compacto reindendola portatil y economica para envios.

TECHNICAL SPECIFICATIONS:

Antenna type dipole
Frequency range 87.5 - 108 MHz
Bandwidth 20 MHz
Impedance 50 Ohms
Connectors N type (1 kw) - 7/8 type (2 kw)
Power rating 2000 Watts max.
VSWR < 1.3
Polarization vertical
Gain 0 dB (referred to half-wave dipole)
H plane 180 degrees
V plane 70 degrees
Front-to-back ratio 7 dB
Lightning protection all parts grounded
Max wind velocity 119 mph (190 km/h)
Wind load 39.6 Lbs (18 kg)
Wind surface 0.12 yd2 (0.11 m2)
Materials (external) stainless steel
Mounting from 2" to 4"
Weight 13 Lbs ( 6 kg)
Dimensions 55"×33"×2" (1400×850×60 mm)
Packing 59"×16"×4" (1500×400×100 mm)

 

 BKG1P Antenna  

Horizontal Pattern

 Vertical Pattern    

Value Table

Single bay

Horizontal

Vertical

Table

2-Bay System

Horizontal

Vertical

Table

4-Bay System

Horizontal

Vertical

Table

6-Bay System

Horizontal

Vertical

Table

8-Bay System

Horizontal

Vertical

Table

 

 

Price for 1000 watt single bay with N connector: $725USD

Price for 2000 watt single bay with 7/8 connector: $795 USD

 

 

FM Power Dividers for use with Bay antennas
Divisores de
Potencia para FM

Model BAC & BAP Series

 

These dividers are available in different versions depending on the bandwidth and power input needed. They are made of brass with internal silver plated lines and teflon insulators. Power dividers may be custom ordered to meet any input and output connector combination requirements not listed below.

Estos divisores son disponibles en diferentes versiones dependiendo de la amplitud de banda y la potencia de entrada que se necesita. Son fabricados de latón con cables internos plateados y insulados con teflón. Las divisores de potencias pueden ser pedidos a medida para satisfacer cualquiera exigencia de combinación de conectores de entrada y salida que no está mencionada en la lista abajo.

TECHNICAL SPECIFICATIONS:

Impedance: 50 Ohms VSWR: 1.05:1 Frequency Bandwidth: 10 MHz (BAC series), 25 MHz (BAP series)

BAC & BAP Series DIMENSIONS (inches)

A=Diameter at narrow end, B=Length, C=Diameter at wide end

MODEL PRICE in USD INPUT OUTPUTS MAX POWER A B C
BAC2N $535 N 2 N 1000 W 1.3 32 3.5
BAC3N $545 N 3 N 1000 W 1.3 32 3.5
BAC4N $565 N 4 N 1000 W 1.3 32 3.5
BAC6N $595 N 6 N 1000 W 1.3 32 3.5
BAC2L $600 LC or 7/16 2 N 2000 W 1.3 33 3.5
BAC3L $615 LC or 7/16 3 N 2000 W 1.3 33 3.5
BAC4L $625 LC or 7/16 4 N 2000 W 1.3 33 3.5
BAC6L $660 LC or 7/16 6 N 2000 W 1.3 33 3.5
BAC2FL $735 EIA 7/8 2 LC or 7/16 5000 W 1.3 35 4.7
BAC3FL $780 EIA 7/8 3 LC or 7/16 5000 W 1.3 35 4.7
BAC4FL $815 EIA 7/8 4 LC or 7/16 5000 W 1.3 35 4.7
BAC6FL $925 EIA 7/8 6 LC or 7/16 5000 W 1.3 35 4.7
BAC2FLP $1075 EIA 15/8 2 EIA 7/8 10000 W 2.3 36 6.7
BAC3FLP $1115 EIA 15/8 3 EIA 7/8 10000 W 2.3 36 6.7
BAC4FLP $1190 EIA 15/8 4 EIA 7/8 10000 W 2.3 36 6.7
BAC6FLP $1310 EIA 15/8 6 EIA 7/8 10000 W 2.3 36 6.7
BAP2N call N 2 N 1000 W 1.3 65 3.5
BAP3N call N 3 N 1000 W 1.3 65 3.5
BAP4N $835 N 4 N 1000 W 1.3 65 3.5
BAP6N $875 N 6 N 1000 W 1.3 65 3.5
BAP2L call LC or 7/16 2 N 2000 W 1.3 66.1 3.5
BAP3L call LC or 7/16 3 N 2000 W 1.3 66.1 3.5
BAP4L $920 LC or 7/16 4 N 2000 W 1.3 66.1 3.5
BAP6L $960 LC or 7/16 6 N 2000 W 1.3 66.1 3.5
BAP2FL call EIA 7/8 2 LC or 7/16 5000 W 1.3 67 4.7
BAP3FL call EIA 7/8 3 LC or 7/16 5000 W 1.3 67 4.7
BAP4FL $1190 EIA 7/8 4 LC or 7/16 5000 W 1.3 67 4.7
BAP6FL $1355 EIA 7/8 6 LC or 7/16 5000 W 1.3 67 4.7
BAP2FLP call EIA 15/8 2 EIA 7/8 10000 W 2.3 69 6.7
BAP3FLP call EIA 15/8 3 EIA 7/8 10000 W 2.3 69 6.7
BAP4FLP $1545 EIA 15/8 4 EIA 7/8 10000 W 2.3 69 6.7
BAP6FLP $1835 EIA 15/8 6 EIA 7/8 10000 W 2.3 69 6.7

 

 

 

Contact Information:

Telephone

416-243-2260

 
Fax

973-909-8447

 
 
Address
Wavemach Communications
320 Dixon road, Suite 302
Toronto, Ontario, CANADA
M9R-1S8, buzzer code 131
 
E mail
fm@fmamplifiers.com
 

Contacto:

Teléfono

Para español por favor contáctenos por e-mail

Fax

973-909-8447

 
 
Dirección
Wavemach Communications
320 Dixon road, Suite 302
Toronto, Ontario, CANADA
M9R-1S8, buzzer code 131
 
E'mail
fm@fmamplifiers.com